DeVilbiss IntelliPAP Bilevel S system

The DeVilbiss IntelliPAP BiLevel DV55 has been specifically designed for patients who require increased pressure levels to maintain therapy compliance. The pressure range of the device is between 3 and 25cm H2O, and it offers perfect flexibility in adjusting the equipment to meet the exact therapeutic needs and requirements. Model DV 55 by DeVilbiss can be operated both as a traditional CPAP and as a Bilevel machine. Important features Patented FlowRounding technology – offers additional support & comfort during pressure changes Ensuring a natural breathing waveform Less than 1% failure rate 3 years warranty by manufacturer Recommended by the best experts in the industry SmartCode technology assures free remote tracking of therapy compliance data. Patients & healthcare providers can easily and quickly check therapy history right on the display panel. Optimal humidification system Small footprint assured by the intelligent stacked design Whisper quiet operation for uninterrupted nights of comfortable sleep (only 26dBA) The DeVILBISS IntelliPAP BiLevel S model DV55 comes with an extremely intuitive setup system. The device is equipped with an Auto ON/OFF button, which ensures that airflow starts synchronously with the first breath of the patient. The extra-long eight-foot power cord gives you the freedom of flexibility you need. Attractive travel case included Reminders alerts to inform the patient when spare parts need to be replaced Extra large slip resistant pads ensure the equipment stays in place without slipping Unique SmartCode Technology uses encrypted data codes which can be easily communicated over the phone to the healthcare provider. These codes help with the generation of necessary clinical reports, and also help healthcare providers setting up the device to your exact therapeutic needs. Maximum compliance & adjustability High pressure rages for patients with exceptional therapeutic needs CPAP & BiLevel mode operation Patented FlowRound technology SmartCode Technology for data tracking Maximum comfort assured during pressure transition Reliable performance & patient satisfaction guarantee Heated humidifier system- provides air therapy at comfortable temperatures The humidifier chamber comes with overfill protection and a capacity of 400mL. The chamber also has a stainless steel plate which is fully corrosive resistant. The unique baffling system increases the air/water exchange for optimal humidity levels. The humidifier (one refill) can be used for 8 hours of continuous air therapy, at the highest setting. Technical Specifications CPAP Size: 4.2”H x 6.5”W x 6.9”D (10.7cm x 16.5cm x 17.5cm) Weight: 1.22 kg (2.7 lbs.) Electrical Requirements AC:  100-240V~, 50/60 Hz Electrical Requirements DC: 10.4 – 15 VDC, 5 Amps Maximum Power Consumption: 65 watts max from AC power source Bilevel Pressure Range: 3-25 cmH2O Operating Temperature Range: 41?F to 104?F (5?C to 40?C) Operating Humidity Range: 0% to 95% RH non-condensing Operating Atmospheric Conditions: Sea level to 8,500 feet (2,600 m) Storage & Transportation Temperature Range:  -40°F to 158°F (-40°C to 70°C) Storage & Transportation Humidity Range: 0% to 95% RH non-condensing Maximum Limited Pressure: 30 cmH2O under normal use Sound Pressure Level (tested per ISO 17510): 26 dBA Sound Power Level: 38 dBA Humidifier System Humidity Output (in the operating flow range): ?10 mgH2O/l air Size: 2.6” H x 6.3” W x 8.4” D (6.6 cm x 16.0 cm x 21.3 cm) Weight: 1.75 lbs. (0.794 Kg) Power Consumption: 85 Watts DV5HH Electrical Requirements: 100-240VAC, 0.95 A Heater Plate Thermal Cutout: 305°F (152°C) Power/Temperature Control: Setting of 1 (minimum) to 10 (maximum) Heater Plate Temperature: 84°F to 149°F (approx. 29°C to approx. 65°C) Operating Temperature Range:  41?F to 104?F (5?C to 40?C) Operating Humidity Range: 0% to 95% RH non-condensing   *NOTE: The Humidifier is an optional accessory, It is not included in the contents of this package.